Aerosolomics based approach to discover source molecular markers: A case study for discriminating residential wood heating vs garden green waste burning emission sources.

Biomass burning is a significant source of particulate matter (PM) in ambient air and its accurate source apportionment is a major concern for air quality. The discrimination between residential wood heating (RWH) and garden green waste burning (GWB) particulate matter (PM) is rarely achieved. The objective of this work was to evaluate the potential of non-targeted screening (NTS) analyses using HRMS (high resolution mass spectrometry) data to reveal discriminating potential molecular markers of both sources. Two residential wood combustion appliances (wood log stove and fireplace) were tested under different output conditions and wood moisture content. GWB experiments were carried out using two burning materials (fallen leaves and hedge trimming). PM samples were characterized using NTS approaches with both LC- and GC-HRMS (liquid and gas chromatography-HRMS). The analytical procedures were optimized to detect as many species as possible. Chemical fingerprints obtained were compared combining several multivariate statistical analyses (PCA, HCA and PLS-DA). Results showed a strong impact of the fuel nature and the combustion quality on the chemical fingerprints. 31 and 4 possible markers were discovered as characteristic of GWB and RWH, respectively. Complementary work was attempted to identify potential molecular formulas of the different potential marker candidates. The combination of HRMS NTS chemical characterization with multivariate statistical analyses shows promise for uncovering organic aerosol fingerprinting and discovering potential PM source markers.

Emission factors and chemical characterization of particulate emissions from garden green waste burning.

This work provides an evaluation of the emission factors (EFs) of typical garden waste burning (fallen leaves and hedge trimming) in terms of particulate matter (PM), elemental and organic carbon (EC-OC) together with a detailed chemical characterization of 88 particle-bound organic species including polycyclic aromatic hydrocarbons (PAHs), levoglucosan and its isomers, lignin breakdown products (methoxyphenols), cholesterol, alkanes, polyols and sugars. Furthermore, wood-log based burning experiments have been performed to highlight key indicators or chemical patterns of both, green waste and wood burning (residential heating) sources, that may be used for PM source apportionment purposes. Two residential log wood combustion appliances, wood stove (RWS) and fireplace, under different output conditions (nominal and reduced) and wood log moisture content (mix of beech, oak and hornbeam), have been tested. Open wood burning experiments using wood logs were also performed. Green waste burning EFs obtained were comparable to the available literature data for open-air biomass burning. For PM and for most of the organic species studied, they were about 2 to 30 times higher than those observed for wood log combustion experiments. Though, poor performance wood combustions (open-air wood log burning, fireplace and RWS in reduced output) showed comparable EFs for levoglucosan and its isomers, methoxyphenols, polyols, PAHs and sugars. Toxic PAH equivalent benzo[a]pyrene EFs were even 3-10 times higher for the fireplace and open-air wood log burning. These results highlighted the impact of the nature of the fuel burnt and the combustion performances on the emissions. Different chemical fingerprints between both biomass burning sources were highlighted with notably a predominance of odd high-molecular weight n-alkanes (higher carbon preference index, CPI), lower levoglucosan/mannosan ratio and lower sinapylaldehyde abundance for green waste burning. However, the use of such indicators seems limited, especially if applied alone, for a clear discrimination of both sources in ambient air.

Viticultural wood waste as a source of polyphenols of interest: Opportunities and perspectives through conventional and emerging extraction methods.

Viticultural waste has been widely demonstrated to contain high-added value compounds named the stilbenes. Among them, trans-resveratrol (Rsv) and trans-ε-viniferin (Vf) are the most abundant in particular in grape canes. Various emerging methods such as ultrasound-assisted extraction (UAE), microwave-assisted extraction (MAE) or pressurized solvent extraction (PSE) have been studied to recover Rsv and Vf from grape canes in order to enhance their extraction. This paper gives a critical overview of the techniques used to this end, integrating conventional and non-conventional methods investigated in the literature as well as those used in industrial processes. It finally highlights that the unconventional technics are usually less time-consuming than conventional extraction ones but further investigations for the discussed compounds and biomass are needed to optimize and understand the influence of the individual parameters of each extraction process.

Speciation of organic fraction does matter for source apportionment. Part 1: A one-year campaign in Grenoble (France).

PM10 source apportionment was performed by positive matrix factorization (PMF) using specific primary and secondary organic molecular markers on samples collected over a one year period (2013) at an urban station in Grenoble (France). The results provided a 9-factor optimum solution, including sources rarely apportioned in the literature, such as two types of primary biogenic organic aerosols (fungal spores and plant debris), as well as specific biogenic and anthropogenic secondary organic aerosols (SOA). These sources were identified thanks to the use of key organic markers, namely, polyols, odd number higher alkanes, and several SOA markers related to the oxidation of isoprene, α-pinene, toluene and polycyclic aromatic hydrocarbons (PAHs). Primary and secondary biogenic contributions together accounted for at least 68% of the total organic carbon (OC) in the summer, while anthropogenic primary and secondary sources represented at least 71% of OC during wintertime. A very significant contribution of anthropogenic SOA was estimated in the winter during an intense PM pollution event (PM10>50µgm-3 for several days; 18% of PM10 and 42% of OC). Specific meteorological conditions with a stagnation of pollutants over 10days and possibly Fenton-like chemistry and self-amplification cycle of SOA formation could explain such high anthropogenic SOA concentrations during this period. Finally, PMF outputs were also used to investigate the origins of humic-like substances (HuLiS), which represented 16% of OC on an annual average basis. The results indicated that HuLiS were mainly associated with biomass burning (22%), secondary inorganic (22%), mineral dust (15%) and biogenic SOA (14%) factors. This study is probably the first to state that HuLiS are significantly associated with mineral dust.

A new ozone denuder for aerosol sampling based on an ionic liquid coating.

A new ionic liquid 1-octyl-3,5-dimethylpyridinium iodide ([O35LUT](+)[I](-)) was synthesized and utilized as coating for an ozone denuder device based on a high-volume aerosol sampler (30 m(3) h(-1)). Particle transmission of the denuder was studied, and over 99% of particles ranging from 10 to 2,500 nm were transmitted. The device, containing 4.66 g of ionic liquid, was used outdoors, under dry and damp atmospheric conditions. In order to expose the device to an average concentration of 120 ppbv (240 microg m(-3)) of ozone in air, an additional production of ozone was directly injected into the denuder. Under these conditions, over 97% of ozone was removed for approximately 120 h (5 days). Therefore, iodide-based ionic liquids can be used as a new alternative to conventional denuder coatings in order to reduce artifacts occurring during sampling of particulate matter. Future applications are not limited to ozone removal for specific aerosol sampling methods.

Stimulation of pyrene mineralization in freshwater sediments by bacterial and plant bioaugmentation.

As a means to study the fate of polycyclic aromatic hydrocarbons (PAHs) in freshwater sediments, pyrene mineralization was examined in microcosms spiked with [14C]pyrene. Some microcosms were planted with reeds (Phragmites australis) and/or inoculated with a pyrene-degrading strain, Mycobacterium sp. 6PY1. Mineralization rates recorded over a 61 d period showed that reeds promoted a significant enhancement of pyrene degradation, which possibly resulted from a root-mediated increase of oxygen diffusion into the sediment layer, as indicated by in situ redox measurements. In inoculated microcosms, mineralization reached a higher level in the absence (8.8%) than in the presence of plants (4.4%). Mineralization activity was accompanied by the release of water-soluble pyrene oxidation products, the most abundant of which was identified as 4,5-diphenanthroic acid. Pyrene was recovered from plant tissues, including stems and leaves, at concentrations ranging between 40 and 240 microg/g of dry mass. Plants also accumulated labeled oxidation products likely derived from microbial degradation. Pyrene-degrading strains were 35-70-fold more abundant in inoculated than in noninoculated microcosms. Most of the pyrene-degrading isolates selected from the indigenous microflora were identified as Mycobacterium austroafricanum strains. Taken together, the results of this study show that plants or PAH-degrading bacteria enhance pollutant removal, but their effects are not necessarily cumulative.